Press "Stop" button first, then press "Foam" button to turn on the automatic foaming function, and the buzzer will beep once.

If it still doesn't work, restart the toilet and set up the function again. （Restart steps: Unplug the power cord of the unit for 30 seconds and then plugging it back in. Once you plug it back in press the reset button at the end of the power cord.)

Long press "full flush " button to turn on the auto flush function, and the buzzer will beep once.  (Attention: It is the same way to turn it off. It may be turned off by accident.)

If it still doesn't work, please unplug the power cord of the unit for 30 seconds and then plugging it back in. Once you plug it back in press the reset button at the end of the power cord. Then set the auto flush function again.

Please Follow with matching instruction. ( Under "User Code" on Page 7.)

The operation of all voice control products should follow the instruction table, otherwise the voice control will be invalid. The indicator sheet is included in the package. If not, please download attached pdf. version.B0931S Voice control Command word list

Note: 1. This voice commands feature is only available for the B0931S.

            2. This instruction sheet can be torn off and pasted on a conspicuous place next to the toilet, so that it is convenient to use voice control when going to the toilet. Please note that the pasted place should be smooth and clean.

            3. Voice control functions such as washing, water pressure, position, wind temperature, water temperature, drying, etc. need to be seated to be effective.

Press and hold the "Seat Temp" button and "Half Flush" button for more than 3 seconds at the same time to turn on the voice function, and the buzzer will sound a "beep"

Note: This voice feature is only available for the B0931S

Long press "Water Temp" button to turn on/turn off night light. (Attention: It is the same way to turn it off. It may be turned off by accident.)

If it still doesn't work, restart the toilet and reset the function. （Restart steps: Unplug the power cord of the unit for 30 seconds and then plugging it back in. Once you plug it back in press the reset button at the end of the power cord.)

It may be turned off by accidenlty. What you can try is a reset as in unplugging the unit and leave it unplugged for about 30 seconds. Plug it back in and then press the reset button (top button) at the end of the power cord. 

 Then please view the attached picture to turn on automatic opening function (Under "User Code" on Page 7). 

All electrical wiring must be performed by a qualified and licensed electrician with complete knowledge of local codes and regulations. Costs of hiring an electrician can vary greatly depending on several factors such as your sauna’s distance from your electrical service box, the state you live in, and the cost of materials. We recommend you get quotes from 2 to 3 different licensed electricians before you begin the installation.