Help Center
Service Phone：562-229-0088
Service E-mail：help@woodbridgebath.com
Service E-mail：help@woodbridgebath.com
Bathtub-BJ Series
BJ400 & BJ700
Please follow the following instructions to set up your bathtub.
Note: DO NOT Power on the water pup if there is no enough water inside the tub. The setting temperature range is between 86˚F to 122˚F (30˚C – 50˚C)
Power Requirement:
BJ400 & BJ700: 1 Dedicated 120V 30Amp Breakers
The white knob is to make a adjustment to the intensity to massage bubble's but only a small adjustment.
- Tub inline heater is designed to MAINTAIN the water temperature. It does NOT rapidly heat up the water.
-
- Before you turn on the “Thermostat (inline-heater), you need to turn on the “Wave Massage (whirlpool-jet)” first.
- When the inline-heater is on, you need to long-press the “Thermostat” button to get into the temperature adjustment mode.
- The temperature screen will start blinking under the temperature adjustment mode.
- Keep clicking on the “Thermostat” button until it reaches a desirable temperature.
Note: The temperature is displayed in Celsius format, not in Fahrenheit format.
You can turn off the lights. Please view the following instructions
The bathtub can stay one color. By default, it will cycle through seven colors every time you turn on the machine. You can press the marked button to stay one certain color.
