Feedback - woodbridgebath.com

How to turn on/off the auto flush function?

Long press “FULL FLUSH” button to turn on/off auto flush function.

If it still doesn't work, restart the toilet and reset the function. （Restart steps: Unplug the power cord of the unit for 30 seconds and then plugging it back in. Once you plug it back in press the reset button at the end of the power cord.)

How to turn on/off auto lid function

Restart the toilet and set up the function. （Restart steps: Unplug the power cord of the unit for 30 seconds and then plugging it back in. Once you plug it back in press the reset button at the end of the power cord.)

Then reset the auto lid function. (Attention: It is the same way to turn it off. It may be turned off by accident.)

Weak Flush

Sometimes the unit has too much water going to the unit, affecting the flushing in a negative way. So what you can try doing is reducing the water pressure going to the unit, on the angle valve there is a knob. First turn the knob slightly about 5-10% of the way closed, the most you want it is about 75% of the way closed. But you do want to play with the amount of pressure and see if this fixes the issue, try not to close it more than 20% of the way, unless needed(ALSO DEPENDS ON YOUR ANGLE VALVE, YOU MIGHT BE ABLE TO TURN IT 75% OF THE WAY SHUT). After each adjustment, you also may have to leave it in the adjusted position for a couple minutes before attempting to flush, and then flush multiple times to test the flushing. So let's say you adjust the angle valve to be 50% of the way closed and then it begins to flush properly, then you'd leave it in that adjusted position.

If it still doesn't work, please email to help@woodbridgebath.com. We will reply within 2 working days. Thank you.

How to do remote control matching

How to turn on/off foot sensor function

Restart the toilet and set up the function. （Restart steps: Unplug the power cord of the unit for 30 seconds and then plugging it back in. Once you plug it back in press the reset button at the end of the power cord.)

Then reset the function. (Attention: It is the same way to turn it off. It may be turned off by accident.)

How to set up the night light function?

Pls follow with the following steps to set up the night light function.

B0990S