Feedback - woodbridgebath.com

Bathtub-BJ Series

BJ200 & BJ300

Dear Customer,

Sorry, we don't have an user manual for this product because is pretty straight foward is only has 3 buttons.

One button is for the air bubbles, the middle buttons is for the intensity of the jets which is minimal, and the other button is for the jets/lights/heater.
The knob on the left, controls the flow and temperature. Dependning on how much you turn that knob is what determines the temp, so if you turn it slightly it should be cold and the more you turn it, the hotter the water gets, or vice versa. Then you can see the knob on the right is what controls where the water is directed to, the diverter. It determines whether the water is going to the spout or hand held shower.
The lights automatically turn on once you turn on the massage motor. In this photo you can see that pushing the button on the left will turn on the massage pump/water jets and the inline heater, the lights also turn on as soon as the massage pump/water jets turn on.

What are the power requirements for this tub?

Power Requirements: 3 Dedicated 15AMP 120V Outlet

BJ200/BJ300 has three cords, all having 3 prong plugs. Meaning you'd need 3, 15 amp breakers.

How do the lights for the chromotherapy work?

The lights automatically turn on once you turn on the massage motor.

Left side will control massage air bubbles
Right side will control the side jets as well as the in-line heater.

How is the heater turned on and off? Does it have any settings?

The heater will automatically turn on when the massage motor is turned on, and the lights as well.

It's main functionality is to keep the temperature of the water you put in the tub, it is not meant to actually warm up water. The heater does not have settings you can adjust, but will automatically heat up to 100 degrees Fahrenheit and then slowly decrease.

Left side will control massage air bubbles
Right side will control the side jets as well as the in-line heater.